Sand Filter & Softner

Water Softening is a simple process of ion-exchange. In this process Calcium & Magnesium ions are exchanged by Sodium ions. Thus, Hardness forming agents are converted in to soluble Sodium salts. Softening is carried out by simple filtration through the exchange material. When the exchange material is exhausted it requires re-generation with Sodium Chloride. The output of softner will vary according to changes in inlet water quality. The quality of raw water is very hard & is bound to produce scaling at regular time intervals. To minimize probability of scaling installation of softner is must.

Industrial RO Plants

Reverse osmosis (RO) is used to reduce dissolved solids from feed waters with salinities up to 45,000 ppm TDS (total dissolved solids). It offers one of the finest filtration known to date. Using a semi-permeable membrane under pressure, RO separates dissolved impurities from water by reversing the flow from a high salinity, or concentrated, solution to the high purity, or "permeate", stream on the opposite side of the membrane. Scale Guard offers a wide variety of RO-based water treatment systems with capacities ranging from 10 to 10,000 litres/hour

Demineralization Systems

By passing water through a resin bed, deionization or demineralization systems work on the principle of ion exchange: synthetic, cation resin exchanges hydrogen ions (H+) for positive ions, and anion resin exchanges hydroxide ions (OH-) for negative ions. Water quality from demineralization systems is typically around 1 part per million (ppm): Scale Guard offers single and separate-bed deionization units for improved water quality. Using ion exchange – replacing calcium and magnesium ions with sodium ions, water softeners eliminate scaling...

Mineral Water Systems

We provide installation, setup and support for nanofiltration and ultrafiltration equipment that concentrate constituents such as dyes, bacteria, proteins, sugars and divalent salts with molecular weight greater than 1000 daltons.

Our strict quality control involves multiple inspections not only during fabrication and assembly of the unit, but also during onsite installation.

Our products are noted for low consumable usage, and almost zero maintenance.

 





DISCOVER THE RIGHT WATER TREATMENT PARTNER

Book an appointment with our teams today.

 

Contact Us